Can Am Spyder Grips & Risers
ISO®-Grips & ISO®-Flame Grips
Combining great style & comfort, these grips provide a soft, non-slip surface that dampens operating vibration. Recessed area between the ISO-Pads permit air movement for added comfort in hot weather.
Can-Am Spyder ISO-Grip End Caps
Replacement for ISO-Grips or styling update for ISO-Flame Grips. Includes standard length screws.
Can-Am Spyder ISO®-Throttle Boss
U.S. Patent D411,432
Added to the popular Küryakyn ISO-Grips, this little jewel can make all the difference in the world on a long ride. The Throttle Boss is a small adjustable paddle that is positioned under the palm of the throttle hand allowing the driver to slightly relax their grip on the gas and still maintain a constant speed.
Fits: Both ISO-Grips and ISO-Flame Grips (Can also be installed on the left grip for a matched set)
New 4.5 Inch Street Magic Easy Risers™
Our new 4.5 inch (114mm) riser will fit all 2008 - 2011 Manual or Electric RS Models.
Fully adjustable forward or back for a more comfortable and enjoyable ride on your Spyder.
These kits are made from die cast aluminum and contain all hardware for years of trouble free service.
Kits comes in 4.5 inch height and allows for use of the existing stock cable, hoses, and wiring without any modifications.
The 4.5 inch kit is only for Spyders who DO NOT have the 1 inch BRP factory riser kits.
Spyder® Handlebar Riser Kits
These kits install quickly to finally allow for a more comfortable and enjoyable ride on your Spyder. This kit allows you to still retain the stock upper console containing the Limited Edition badges.
These kits are made from T6061 billet aluminum and contain all stainless steel hardware for years of trouble free service.
Kits come in both 3 inch and 4 inch heights and allow for use of the existing stock cable, hoses, and wiring without any modifications or lengthening necessary.
The 4 inch kit is only for Spyders who DO NOT have the 1 inch BRP factory riser kits.
The 3 inch kit is designed to be used when you already have the BRP 1 inch factory riser kit installed, or if you don’t want as much rise in your bars.
You can also add the billet bolt caps to your risers for the upper bar bolts, and give your riser kit a matching custom look (sold separately).
3” and 4" risers are available for the SE-5 Spyder (Electronic Shift)
3” and 4” Risers are for the SM-5 Spyder (Manual Shift)
Available in Aluminum and Black Anodize Finish
Fits: 2008-2009 SE5 & SM5, 2010-2011 RS
Can-Am Spyder Cruise Assist by Kaoko
A simple, effective cruise control for your bike!!
Features/Benefits
Maintains throttle position while allowing you to relax your hand, wrist and forearms.
Greatly reduces rider fatigue and strain on hand and wrist
‘Stealth’ design, blends in
Very simple to install. Takes less than 15 minutes to fit stock grips, a bit longer for aftermarket grips
Very simple to operate, even with heavy winter gloves
High quality, compact and durable design, super smooth action
Operation
The friction nut has a left-hand thread. It must be adjusted so that it makes light contact with the rubber throttle sleeve.
To Engage: While rolling on the throttle, the friction nut can be gripped between the small finger and palm of hand. This action tightens the nut and provides sufficient friction to set throttle to the desired opening. (The friction is such that the rider may still open and close the throttle. It simply has a slight stiffness to it.)
To Disengage: While rolling off the throttle, grip friction nut between small finger and palm of hand. The throttle should open and snap closed freely when correctly disengaged.
Note: Does not work with Kuryakyn ISO Grips
Note: Does not work with Easy Risers
Fits: 2008-2009 SE5 & SM5, 2010-2011 RS
Can-Am Spyder Mirror Extensions
These extensions will not only move the mirrors out, but also up as well, allowing for a far greater view.
These extensions will move the mirror up almost 1.5 inches while moving them out a bit over 2.5 inches
These Up & Out Extensions are made of billet T6061 Aircraft grade aluminum and feature the latest 3D CNC machining and design techniques to produce a one piece core block with a smooth body blending design looking almost factory once installed with a textured black powder-coated finish.
These Up & Out Extensions also incorporate the same 3 locking tabs in the base to hold the unit firmly in place just like the stock mirrors do. No more having to tighten the bolts to the point of breaking to keep them from moving as these will now firmly lock into place just like the stock mirrors
Fits: 2008-2009 SE5 & SM5, 2010-2011 RS
Does not fit with BRP Touring Windshield without modification to windshield
Spyder Engraved Billet Master Cylinder Cover
This cover easily goes over you stock master cylinder cap and adds some style and flair to an otherwise bland, normally "function only" part.
Made of T6061 Aircraft Grade Billet Aluminum with a Hard Coat Anodized finish for a long lasting beautiful and durable finish.
Each cover is engraved with a Spider in it's web design to add some flair and style to your ride.
Fits: 2008-2009 SE5 & SM5, 2010-2011 RS
| 
